Before any batt goes in

Downlights: what has to change before insulation can go over them.

Insulation over a hot light is a fire risk. The program requires every downlight in the ceiling to be IC or IC-4 rated before the rebate applies. Here is what that means and what it costs.

The three types

Halogen, LED, IC-4.

Halogen: insulation must stop short

clearance, no cover

IC-4: insulation can go straight over

IC-4 rated

Cross-section: insulation kept clear of a halogen downlight, and laid over an IC-4 fitting. The coloured band is the new insulation. Only an IC-4 fitting can sit under it.
Replace01

Halogen

Runs hot, often above 200 °C at the fitting. Insulation can never be laid over or around it. Must be replaced before the rebate applies.

Check02

LED, not IC rated

Runs cool, but the fitting is not tested for contact with insulation. Needs a clearance or a cover, which the installer checks on the day.

Ready03

IC-4 rated

Tested so insulation can be laid directly over and around it. The target for every downlight in a VEU ceiling. Most new LED fittings are IC-4.

The electrician's check

Who checks, and when.

A licensed electrician from a Registered Electrical Contractor visits before the install. The check is done no earlier than 30 days before the works. You and the installer get the report at least 24 hours before anyone enters the roof.

  • 01The electrician inspects the wiring and every downlight in the ceiling.
  • 02Halogens and other non-rated fittings are listed for replacement with IC-4 fittings.
  • 03Replacement happens before install day. You see the fixed price first.
  • 04On the day, the installer checks again and photographs each fitting before the batts go in.

The price

$90 per fitting including GST.

$90
01
Per fitting

per halogen replaced with an IC-4 fitting, including GST and the fitting itself

$180
02
Call-out under 10 fittings

call-out when there are fewer than 10 fittings. No call-out at 10 or more.

Both prices are shown on your written quote before any work starts. If you would rather use your own electrician, the fittings must be IC-4 rated and the report must reach us at least 24 hours before install.

Certificates will be created by Pro Insulation Corp Pty Ltd. Participation is voluntary. Pro Insulation does not represent the Victorian Government.

Back to how the rebate works

Ready when you are

60 seconds to check your home, 1 business day to a written quote.

Servicing Melbourne, Geelong & Ballarat. Written quotes, 50-year warranty, and not a subcontractor in sight.